网站建设:

厂址 : 湖 南省汉寿高新技术产业园区
Add : Hanshou High-tech Industrial Park,Hunan Province
电话(TEL) / 传真(FAX) : 0736-2176968
联系人(Contacts) : 刘先生18907362633    曾先生13974271263
邮箱(e-mail) : 1273732776@qq.com 

 

SERVICE AND SUPPORT

服务与支持

【RSIC产品使用注意事项】 
   如果产品潮湿,务 必在使用前进行烘干,建议烘干温度80-100°C;
   RSIC属脆性产品,所 以在使用中一定要轻拿轻放;
   RSIC在高温下,易被水氧化,所 以尽量采取纯净燃气,尽 量减少燃气中的水含量;
   尽量不要在1000°C以 上打开炉门突然降温,以避免RSIC产品产生崩裂现象;
   不要用湿耐火泥固定RSIC产品,避免RSIC产品炸裂;
   RSIC导热系数(24W/MK)较高,与 其接触的耐火材料导热系数尽可能与RSIC接近或放 慢升降温度速率,以避免因热震开裂。

RSIC product usage notes 
   If the product is wet, be sure to dry it before use. The recommended drying temperature is 80-100 °C.
   RSIC is a brittle product, so it must be handled with care.
   RSIC is easily oxidized by water at high temperatures, so try to use pure gas to minimize the amount of water in the gas.
   Do not try to open the furnace door to a sudden temperature drop above 1000° C to avoid cracking of the RSIC product.
   Do not use wet fire-resistant mud to fix RSIC products and avoid bursting of RSIC products.
   RSIC thermal conductivity (24w/MK) is high, and the thermal conductivity of the refractory material in contact with it is as close as possible to the RSIC or slows down the rate of temperature rise and fall to avoid cracking due to thermal shock.
友情链接: